From: Mark Kantrowitz
Subject: FAQ: Lisp Implementations and Mailing Lists 4/7 [Monthly posting]
Date:
Message-ID: <lisp_4.faq_758494343@cs.cmu.edu>
Archive-name: lisp-faq/part4
Last-Modified: Mon Dec 27 17:23:47 1993 by Mark Kantrowitz
Version: 1.41
;;; ****************************************************************
;;; Answers to Frequently Asked Questions about Lisp ***************
;;; ****************************************************************
;;; lisp_4.faq -- 54173 bytes
This post contains Part 4 of the Lisp FAQ. It is cross-posted to the
newsgroup comp.lang.scheme because it contains material of interest to
Scheme people. The other parts of the Lisp FAQ are posted only to the
newsgroups comp.lang.lisp and news.answers.
If you think of questions that are appropriate for this FAQ, or would
like to improve an answer, please send email to us at ········@think.com.
Lisp/Scheme Implementations and Mailing Lists (Part 4):
[4-0] Free Common Lisp implementations.
[4-1] Commercial Common Lisp implementations.
[4-1a] Lisp to C translators
[4-2] Scheme Implementations
[4-4] Free Implementations of Other Lisp Dialects
[4-5] Commercial Implementations of Other Lisp Dialects
[4-6] What is Dylan?
[4-7] What is Pearl Common Lisp?
[4-9] What Lisp-related discussion groups and mailing lists exist?
[4-10] ANSI Common Lisp -- Where can I get a copy of the draft standard?
Search for \[#\] to get to question number # quickly.
----------------------------------------------------------------
Subject: [4-0] Free Common Lisp implementations.
Repositories of Lisp source code are described in the answer to
question [6-1].
Remember, when ftping compressed or compacted files (.Z, .arc, .fit,
etc.) to use binary mode for retrieving the files.
Kyoto Common Lisp (KCL) is free, but requires a license. Conforms to CLtL1.
KCL was written by T. Yuasa <·····@tutics.tut.ac.jp> and M. Hagiya
<······@is.s.u-tokyo.ac.jp> at Kyoto University. Austin Kyoto Common Lisp
(AKCL) is a collection of ports, bug fixes and improvements to KCL
by Bill Schelter (<···@cli.com> or <···@rascal.ics.utexas.edu>). {A}KCL
generates C code which it compiles with the local C compiler. Both are
available by anonymous ftp from rascal.ics.utexas.edu [128.83.138.20],
ftp.cli.com [192.31.85.1], or [133.11.11.11] (a machine in Japan)
in the directory /pub. KCL is in the file kcl.tar, and AKCL is in the
file akcl-xxx.tar.Z (take the highest value of xxx). To obtain KCL, one
must first sign and mail a copy of the license agreement to: Special
Interest Group in LISP, c/o Taiichi Yuasa, Department of Computer Science,
Toyohashi University of Technology, Toyohashi 441, JAPAN. Runs on Sparc,
IBM RT, RS/6000, DecStation 3100, hp300, hp800, Macintosh II (under AUX),
mp386, IBM PS2, Silicon Graphics 4d, Sun3, Sun4, Sequent Symmetry,
IBM 370, NeXT and Vax. A port to DOS is in beta test as
math.utexas.edu:pub/beta2.zip. Commercial versions of {A}KCL are available
from Austin Code Works, 11100 Leafwood Lane, Austin, TX 78750-3409,
Tel. 512-258-0785, Fax 512-258-1342, E-mail ·······@acw.com,
including a CLOS for AKCL. See also Ibuki, below.
XLISP is free, and runs on the IBM PC (MSDOS), Amiga (AmigaDOS),
Atari ST (TOS), Apple Macintosh, and Unix. It should run on
anything with a C compiler. It was written by David Michael Betz,
167 Villa Avenue #11, Los Gatos, CA 95032, 408-354-9303 (H),
408-862-6325 (W), ·····@apple.com. The reference manual was
written by Tim Mikkelsen. Version 2.0 is available by anonymous ftp from
cs.orst.edu:/pub/xlisp/ [128.193.32.1] or
sumex-aim.stanford.edu:info-mac/lang/
Version 2.1 is the same as XLISP 2.0, but modified by Tom Almy to
bring it closer to Common Lisp and with several bugs fixed. It can
be obtained by anonymous ftp from
ftp.biostr.washington.edu:/pub/xlisp [128.95.10.115]
wasp.eng.ufl.edu:/pub [128.227.116.1]
as the files xlisp21e.zip and xlisp21e.tar.Z. The xlisp21e.zip file comes
with IBM/PC executables. A Macintosh port of version 2.1e (and the
C source code to its interface) is also available, from Macintosh
ftp sites such as sumex.stanford.edu:/info-mac/dev/xlisp-21e2.hqx
and mac.archive.umich.edu:/mac/development/languages/xlisp2.1e2.sit.hqx.
(Mac version written by Brian Kendig, <········@netcom.com>.)
For obtaining a copy through US mail, send email to Tom Almy,
····@sail.labs.tek.com. A Windows version of the statistical
version of xlisp is available by anonymous ftp from
ftp.cica.indiana.edu:/util/ as wxlslib.zip.
CMU Common Lisp (CMU CL) is free, and runs on HPs, Sparcs (Mach and SunOs),
DecStation 3100 (Mach), IBM RT (Mach) and requires 16mb RAM, 25mb
disk. It includes an incremental compiler, Hemlock emacs-style editor,
source-code level debugger, code profiler and is mostly X3J13
compatible, including the new loop macro. It is available by anonymous
ftp from any CMU CS machine, such as ftp.cs.cmu.edu [128.2.206.173], in the
directory /afs/cs.cmu.edu/project/clisp/release. Login with username
"anonymous" and ·······@host" (your email address) as password. Due to
security restrictions on anonymous ftps (some of the superior
directories on the path are protected against outside access), it is
important to "cd" to the source directory with a single command.
Don't forget to put the ftp into binary mode before using "get" to
obtain the compressed/tarred files. The binary releases are
contained in files of the form
<version>-<machine>_<os>.tar.Z
Other files in this directory of possible interest are
16f-source.tar.Z, which contains all the ".lisp" source files
used to build version 16f. A listing of the current contents of the
release area is in the file FILES. You may also use "dir" or "ls" to
see what is available. Bug reports should be sent to ··········@cs.cmu.edu.
WCL is an implementation of Common Lisp for Sparc based workstations.
It is available free by anonymous ftp from sunrise.stanford.edu in the
pub/wcl directory. The file wcl-2.14.tar.Z contains the WCL
distribution, including CLX and PCL; wgdb-4.2.tar.Z contains a version
of the GDB debugger which has been modified to grok WCL's Lisp; and
gcc-2.1.tar.Z contains the GNU C compiler (2.2.2 does not work!). WCL
provides a large subset of Common Lisp as a Unix shared library that
can be linked with Lisp and C code to produce efficient and small
applications. For example, the executable for a Lisp version of the
canonical ``Hello World!'' program requires only 40k bytes under
SunOS 4.1 for SPARC. WCL provides CLX R5 as a shared library, and
comes with PCL and a few other utilities. For further information
on WCL, see the paper published in the proceedings of the 1992 Lisp
and Functional Programming Conference, a copy of which appears in
the wcl directory as lfp-paper.ps, or look in the documentation
directory of the WCL distribution. Written by Wade Hennessey
<····@sunrise.stanford.edu>. Please direct any questions to
···@sunrise.stanford.edu. If you would like to be added to a
mailing list for information about new releases, send email to
···········@sunrise.stanford.edu.
CLISP is a Common Lisp (CLtL1 + parts of CLtL2) implementation by
Bruno Haible of Karlsruhe University and Michael Stoll of Munich
University, both in Germany. It runs on microcomputers (DOS, OS/2,
Atari ST, Amiga 500-4000) as well as on Unix workstations (Linux, Sun4,
Sun386, HP9000/800, SGI, Sun3 and others) and needs only 1.5 MB of RAM.
It is free software and may be distributed under the terms of GNU GPL.
German and English versions are available, French coming soon. CLISP
includes an interpreter, a compiler, a subset of CLOS and, for some
machines, a screen editor. Packages running in CLISP include PCL and,
on Unix machines, CLX and Garnet. Available by anonymous ftp from
ma2s2.mathematik.uni-karlsruhe.de [129.13.115.2] in the directory
/pub/lisp/clisp. For more information, contact
······@ma2s2.mathematik.uni-karlsruhe.de.
There is a mailing list for users of CLISP. It is the proper forum for
questions about CLISP, installation problems, bug reports, application
packages etc. For information about the list and how to subscribe,
send mail to ········@ma2s2.mathematik.uni-karlsruhe.de, with the two lines
help
information clisp-list
in the message body.
A Sybase SQL interface interface for CLIPS is available
by anonymous ftp from wuarchive.wustl.edu:packages/clips2sybase/. For
more information, write to Sherry Steib <······@informatics.wustl.edu>.
CLiCC (Common Lisp to C Compiler) generates C-executables from Common
Lisp application programs. CLiCC is not a Common Lisp system, and
hence does not include any program development or debugging support.
CLiCC is intended to be used as an add-on to existing Common Lisp
systems for generating portable applications. CLiCC supports CL_0, a
subset of Common Lisp + CLOS, which excludes EVAL and related
functions. At present CL_0 is based on CLtL1, but is headed towards
CLtL2 and ANSI-CL. The generated C code (ANSI-C or K&R-C compatible)
may be compiled using a conventional C compiler on the target
machine, and must be linked with the CLiCC runtime library in order
to generate executables. CLiCC is available by anonymous ftp from
ftp.informatik.uni-kiel.de:pub/kiel/apply/clicc-0.6.1.tar.Z
[134.245.15.113].
CLiCC was developed by Wolfgang Goerigk <··@informatik.uni-kiel.de>,
Ulrich Hoffman <···@informatik.uni-kiel.de>, and Heinz Knutzen
<··@informatik.uni-kiel.de> of Christian-Albrechts-Universitaet zu
Kiel, Institut fuer Informatik und Praktische Mathematik,
Preusserstr. 1-9, D-24105 Kiel, Germany. The authors welcome
suggestions and improvements and would appreciate receiving email
even if you just used CLiCC successfully.
RefLisp is a small Lisp interpreter. Versions exist for MS-DOS and
UNIX (AIX). The MS-DOS version supports CGA/EGA/VGA graphics and the
Microsoft Mouse. The interpreter is a shallow-binding (i.e.,
everything has dynamic scope), reference counting design making it
suitable for experimenting with real-time and graphic user interface
programming. Common Lisp compatibility macros are provided, and most
of the examples in "Lisp" by Winston & Horn have been run on RefLisp.
RefLisp makes no distinction between symbol-values and
function-values, so a symbol can be either but not both. RefLisp
comes with an ASCII manual and many demonstration programs, including
an analogue clock which never stops for garbage collection. It is
written in ANSI C and is in the public domain. Source and binaries are
available in the Lisp Utilities repository by anonymous ftp from
ftp.cs.cmu.edu in the directory
/afs/cs.cmu.edu/project/ai-repository/ai/lang/lisp/impl/reflisp/
For further information, send email to the author Bill Birch
<···@tpg.tpg.oz.au>.
ECoLisp is a Common Lisp implementation which compiles Lisp functions
into C functions that use the C stack and standard procedure call
conventions. This lets Lisp and C code be easily mixed. It can be used
as a C library from any C application. It is available by anonymous
ftp from apollo.di.unipi.it:/pub/software/lisp/. This is an alpha
release. So far it has been tested with GCC under DOS, and a Unix
version should be ready shortly. For more information, please contact
Giuseppe Attardi <·······@di.unipi.it>.
PowerLisp is a Common Lisp development environment for the Macintosh.
It consists of a Common Lisp interpreter, native-code 680x0 compiler,
680x0 macro assembler, disassembler, incremental linker and
multi-window text editor. It requires a Macintosh with at least a
68020 processor (any Mac except a Plus, SE or Classic) and system 7.0
or later. About 2 megabytes of RAM are required to run it, and to do
much with it you need more like 5 or 6 megabytes. Like any Common Lisp
system, the more memory the better. PowerLisp has the ability to run
in the background. While executing a Common Lisp program, the user may
switch to another application as it continues to run. You can also
edit programs while a Common Lisp program is running. PowerLisp is
targeted to be compatible with CTLTL2 without CLOS (for now) but some
Common Lisp functions are not yet implemented. Upcoming versions
should include the remaining language features. The current released
version is 1.01, with 1.02 scheduled for release late November/early
December. PowerLisp is available from America Online and Genie as a
shareware program ($50). It is also available from the Lisp
Repository, as
ftp.cs.cmu.edu:user/ai/lang/lisp/impl/powerlisp/powerlisp1.01.sit.hqx
Written by Roger Corman. For more information, send mail to
·····@island.com or ········@aol.com (RogerC34 on America Online).
----------------------------------------------------------------
Subject: [4-1] Commercial Common Lisp implementations.
Macintosh Common Lisp (MCL 2.0) runs on the Apple Macintosh (Mac+ or
higher with 4mb RAM and system software 6.0.4 or later or AUX 3.0) and
is available from APDA for $495. It includes a native CLOS Macintosh
Toolbox/interface toolkit, ephemeral garbage collection, incremental
compiler, window-based debugger, source-code stepper, object
inspector, emacs-style editor, and a foreign function interface.
Bug reports should be sent to ·······@cambridge.apple.com. With
MCL version 2.0, Apple has started distributing a CD-ROM which
contains, among other things, a large collection of Lisp code,
complete MCL manuals in an online-browser format, the CLIM 1.0 manual
in TeX and postscript, and copies of Gambit 1.8 Scheme, SIOD 2.8
Scheme, Pixie Scheme, and a demo version of MacScheme. For more
information, write to: APDA, Apple Computer Inc., 20525 Mariani
Avenue, MS 33-G, Cupertino, CA 95014-6299 or call toll free
1-800-282-2732 (US), 1-800-637-0029 (Canada), 1-408-562-3910. Their
fax number is 1-408-562-3971 and their telex is 171-576. Email may
also be sent to ····@applelink.apple.com or ··········@compuserve.com.
CLIM for MCL is available for $495 as a separate product from
Lucid, Inc., 707 Laurel Street, Menlo Park, CA 94025 U.S.A.,
415-329-8400, fax: 415-329-8480, <·····@lucid.com>.
Procyon Common Lisp runs on either the Apple Macintosh or IBM PC (386/486
or OS/2 native mode), costing 450 pounds sterling ($675) educational,
1500 pounds ($2250) commercial. It requires 2.5mb RAM on the Macintosh
and 4mb RAM on PCs (4mb and more than 4mb recommended respectively). It
is a full graphical environment, and includes a native CLOS with
meta-object protocol, incremental compilation, foreign function
interface, object inspector, text and structure editors, and debugger.
Write to: Scientia Ltd., St. John's Innovation Centre, Cowley Road,
Cambridge, CB4 4WS, UK, with phone +44-223-421221, fax +44-223-421218.
[NOTE: The rights to the MS Windows version of Procyon were sold to
Franz who are marketing and developing it as Allegro CL\PC. See
Allegro's entry for more information. The MS Windows version of
Procyon is no longer available from Scientia. Expertelligence no
longer distributes any version of Procyon.]
Allegro Common Lisp 4.1 runs on a variety of platforms, including
Sparcs, RS6000, HP700, Silicon Graphics, DecStation (prices start at
$4,500) and NeXT ($2,000). It requires 12mb RAM for the 680x0 and 16mb
for RISC. It includes native CLOS, X-windows support, Unix interface,
incremental compilation, generational garbage collection, and a
foreign function interface. Options include Allegro Composer
(development environment, including debugger, inspector, object
browser, time/space code profiler, and a graphical user interface,
$1,500), Common LISP Interface Manager (CLIM 2.0 is a portable
high-level user interface management system. CLIM 2.0 for Allegro
CL supports both Motif and Openlook, $1,000) and Allegro CLIP
(a parallel version of Lisp for the Sequent). Franz also markets
Allegro CL\PC for Windows 3.1 for an introductory price of $595 (due
to increase to $995 on July 1, 1993). Allegro CL\PC provides 32-bit
compilation, complete CLOS, an integrated development environment,
interface to the Windows API, DLL support, and free runtime delivery.
Write to: Franz Inc., 1995 University Avenue, Berkeley, CA 94704 or
call 1-800-333-7260, 510-548-3600, fax 510-548-8253, telex 340179
WUPUBTLXSFO. Bug reports can be mailed to ····@franz.com. Questions
about Franz Inc. products (e.g., current and special pricing) can be
sent to ····@franz.com. To receive Franz Flash, Franz's electronic
newsletter, send mail to ·····@franz.com. The Franz Forum bboard is
accessible by telnet to franzforum.franz.com. Files related to the
bboard (e.g., patches, Franz's GNU-Emacs/Lisp interface, the Allegro FAQ)
are available by anonymous ftp to ftp.uu.net:vendor/franz/.
Ibuki Common Lisp is a commercialized and improved version of Kyoto
Common Lisp. It runs on over 30 platforms, including Sun3, Sparc, Dec
(Ultrix), Apollo, HP 9000, IBM RS/6000, Silicon Graphics and IBM PCs.
It includes an incremental compiler, interpreter, foreign function
interface. It generates C code from the Lisp and compiles it using the
local C compiler. Image size is about 3mb. Cost is $2800 (workstations),
$3500 (servers), $700 (IBM PCs). Supports CLOS and CLX ($200 extra).
Source code is available at twice the cost. Ibuki now also has a product
called CONS which compiles Lisp functions into linkable Unix libraries.
Write to: Ibuki Inc., PO Box 1627, Los Altos, CA 94022, or call
415-961-4996, fax 415-961-8016, or send email to Richard Weyhrauch,
···@ibuki.com or ·······@ibuki.com.
Lucid Common Lisp runs on a variety of platforms, including PCs (AIX),
Apollo, HP, Sun-3, Sparc, IBM RT, IBM RS/6000, Decstation 3100,
Silicon Graphics, and Vax, and costs $2500 (IBM PCs), $4400 (other
platforms). Lucid includes native CLOS, a foreign function interface,
and generational garbage collection. CLIM is available for Lucid as
a separate product. Write to Lucid Inc., 707 Laurel Street, Menlo Park,
CA 94025, call toll free 800-225-1386 (or 800-843-4204), 415-329-8400,
fax 415-329-8480, or email to ·····@lucid.com for information on pricing,
product availability, etc. Technical questions may be addressed to
················@lucid.com. See also the comments in question [1-2]
on the wizards.doc file that comes with the release.
Medley is a Common Lisp development environment that includes a native
CLOS w/MOP, window toolkit, window-based debugger, incremental
compiler, structure editor, inspectors, stepper, cross-referencer,
code analysis tools, and browsers. It is the successor to InterLisp-D.
It runs on a variety of platforms, including Suns, DecStations,
386/486s, IBM RS/6000, MIPS, HP, DEC Alpha, and Xerox 1186. Medley also runs
under DOS and will shortly be available on the Macintosh too.
Developer version costs $995 and run-time version $300.
Instructional costs $250/copy or $1250 site license. Write to: Venue,
1549 Industrial Rd, San Carlos, CA 94070, call 800-228-5325,
415-508-9672, fax 415-508-9770, or email
············@envos.xerox.com.
Golden Common Lisp (GCLisp) runs on IBM PCs under DOS and Windows,
costing $2,000 ($250 extra for Gold Hill Windows), and includes an
incremental compiler, foreign function interface, interactive
debugger, and emacs-like editor. It supports DDE and other Windows
stuff, and is CLtL1 compatible. Supports PCL. It requires 4mb RAM,
and 12mb disk. See a review in PC-WEEK 4/1/91 comparing GCLisp with
an older version of MCL. Write to: Gold Hill Computers, 26 Landsdowne
Street, Cambridge, MA 02139, call 617-621-3300, or fax 617-621-0656.
Star Sapphire Common LISP provides a subset of Common Lisp and includes
an emacs-like editor, compiler, debugger, DOS graphics and CLOS. It
runs on IBM PCs (MSDOS), requires 640k RAM, a hard disk, and costs $100.
Write to: Sapiens Software Corporation, PO Box 3365,
Santa Cruz, CA 95063-3365, call 408-458-1990, or fax 408-425-0905/9220.
Copies may also be ordered from the Programmers' shop at 800-421-8006.
Sapiens Software also has a Lisp-to-C translator in beta-test.
NanoLISP is a Lisp interpreter for DOS systems that supports a
large subset of the Common Lisp standard, including lexical and
dynamic scoping, four lambda-list keywords, closures, local functions,
macros, output formatting, generic sequence functions, transcendental
functions, 2-d arrays, bit-arrays, sequences, streams, characters
double-floats, hash-tables and structures. Runs in DOS 2.1 or higher,
requiring only 384k of RAM. Cost is $100. Write to: Microcomputer Systems
Consultants, PO Box 6646, Santa Barbara, CA 93160 or call 805-967-2270.
Software Engineer is a Lisp for Windows that creates small stand-alone
executables. It is a subset of Common Lisp, but includes CLOS. It
requires 2mb RAM, but can use up to 16mb of memory, generating 286
specific code. It costs $250. Write to: Raindrop Software, 833
Arapaho Road, Suite 104, Richardson, TX 75081, call 214-234-2611,
fax 214-234-2674, or send email to ··········@compuserve.com.
muLISP-90 is a small Lisp which runs on IBM PCs (or the HP 95LX
palmtop), MS-DOS version 2.1 or later. It isn't Common Lisp, although
there is a Common Lisp compatibility package which augments muLISP-90
with over 450 Common Lisp special forms, macros, functions and control
variables. Includes a screen-oriented editor and debugger, a window
manager, an interpreter and a compiler. Among the example programs is
DOCTOR, an Eliza-like program. The runtime system allows one to create
small EXE or COM executables. Uses a compact internal representation
of code to minimize space requirements and speed up execution. The
kernel takes up only 50k of space. Costs $400. Write to Soft
Warehouse, Inc., 3660 Waialae Avenue, Suite 304, Honolulu, HI
96816-3236, call 808-734-5801, or fax 808-735-1105.
CLOE (Common Lisp Operating Environment) is a cross-development
environment for IBM PCs (MSDOS) and Symbolics Genera. It includes
CLOS, condition error system, generational garbage collection,
incremental compilation, code time/space profiling, and a stack-frame
debugger. It costs from $625 to $4000 and requires 4-8mn RAM and a 386
processor. Write to: Symbolics, 6 New England Tech Center,
521 Virginia Road, Concord, MA 01742, call 1-800-394-5522 or
508-287-1000 or fax 508-287-1099.
Top Level Common Lisp includes futures, a debugger, tracer, stepper,
foreign function interface and object inspector. It runs on Unix
platforms, requiring 8mb RAM, and costs $687. Write to: Top Level,
100 University Drive, Amherst, MA 01002, call (413) 549-4455, or fax
(413) 549-4910.
Harlequin Lispworks runs on a variety of Unix platforms, including
Sun3/Sun4, Sparc, RS/6000, DEC/MIPS, DEC Alpha (OSF), Intergraph
C300 and C400, HP400, HP700, and Sparc clones. A cross compiler is
available that will produce run-time images that run on 386/486
DOS/Window 3.1 platforms. It is a full graphical Common Lisp
environment, with a fully implemented Prolog compiler and SQL interface.
Common Lisp: CLtL2 compatible, native CLOS/MOP, generational GC,
Fortran/C/C++ interface.
Environment : Prolog, Emacs-like editor/listener/shell, defadvice,
defsystem, cross-referencing, lightweight processes,
debugger, mail reader, extensible hypertext online doc, LALR
parser generator.
Browsers/graphers: files, objects, classes, generic functions,
source code systems, specials, compilation warnings.
Graphics: CLX, CLUE, Toolkit, CLIM, Open Look, Motif, interface
builder, program visualization.
Integrated Products: KnowledgeWorks (RETE engine)
Write to: Harlequin Inc. One Cambridge Center, Cambridge, MA 02142,
call 800-967-5749 (617-252-0052), fax 617-252-6505 or send email to
·····@harlequin.com or ··@harlequin.com or ···@harlequin.com.
European customers should write to Harlequin Limited, Barrington Hall,
Barrington, Cambridge, CB2 5RG, call 0223-872-522 (or 44-223-872-522
outside UK), telex 818440 harlqn g, fax 0223-872-519, or send email
to ··@harlqn.co.uk or ·····@harlqn.co.uk ("harlqn" and "harlequin"
should be interchangeable). Further information on
Harlequin's Lisp products may be obtained by sending mail to
·················@harlequin.co.uk or ·················@harlequin.com.
Poplog Common Lisp is an integrated Lisp/Prolog environment with an
incremental compiler. It runs on a variety of platforms, including
Unix ($749), Sparc ($4500), Macintosh AUX ($749), and VAX/VMS
($4500). There are no run-time fees. Write to: Computable Functions, Inc.,
35 South Orchard Drive, Amherst, MA 01002, call 413-253-7637, or fax
413-545-1249.
Lisps which run on special-purpose hardware (Lisp Machines) include
o Symbolics 1-800-394-5522 (508-287-1000) fax 508-287-1099
6 New England Tech Center, 521 Virginia Road, Concord MA 01742
In Germany: Symbolics Systemhaus GmbH, Mergenthalerallee 77,
65760 Eschborn, (49) 6196-47220, fax (49) 6196-481116.
o TI Explorers
Texas Instruments Incorporated, Data Systems Group,
P.O. Box 181153 DSG-230, Austin, Texas 78718
o Xerox Interlisp. See Medley above.
----------------------------------------------------------------
Subject: [4-1a] Lisp to C translators
Lisp-to-C Translator translates Common Lisp into ANSI C, but requires
that you specify when and where you'd like your garbage to be
collected. Works with Lucid, Symbolics, Allegro, Harlequin and MCL.
It costs $12,000. Write to: Chestnut Software, Inc., 2 Park Plaza,
Suite 205, Boston, MA, 02116, call 617-542-9222, fax 617-542-9220, or
e-mail Mr. Kenneth J. Koocher <···@chestnut.com>.
Some Lisp compilers (AKCL, Ibuki) and Scheme compilers (Bigloo,
Hobbit/SCM, Scheme->C) compile into C.
----------------------------------------------------------------
Subject: [4-2] Scheme Implementations
Scheme implementations are listed in the Scheme FAQ posting,
Free Scheme implementations include PC-Scheme, PCS/Geneva, MIT Scheme (aka
C-Scheme), SCM, Hobbit, Gambit, T, Oaklisp, Elk, Scheme->C, SIOD
(Scheme in One Defun), XScheme, Fools' Lisp, Scheme48, UMB Scheme,
VSCM, Pixie Scheme, HELP (a lazy Scheme), Similix, FDU Scheme,
PseudoScheme, Scheme84 and Scheme88.
Commercial Scheme implementations include Chez Scheme, MacScheme, and EdScheme.
Of the free Scheme implementations, the following are implemented in Lisp:
Peter Norvig's book "Paradigms of AI Programming" has a chapters about
Scheme interpreters and compilers, both written in Common Lisp. The
software from the book is available by anonymous ftp from
unix.sri.com:pub/norvig and on disk in Macintosh or DOS format from
the publisher, Morgan Kaufmann. For more information, contact: Morgan
Kaufmann, Dept. P1, 2929 Campus Drive, Suite 260, San Mateo CA 94403,
or call Toll free tel: (800) 745-7323; FAX: (415) 578-0672
PseudoScheme is available free by anonymous ftp from
altdorf.ai.mit.edu:/archive/pseudo/pseudo-2-8.tar.Z. It is Scheme
implemented on top of Common Lisp, and runs in Lucid, Symbolics CL,
VAX Lisp under VMS, and Explorer CL. It should be easy to port to
other Lisps. It was written by Jonathan Rees (···@altdorf.ai.mit.edu,
···@cs.cornell.edu). Send mail to ·····················@mc.lcs.mit.edu
to be put on a mailing list for announcements. Conforms to R3RS except
for lacking a correct implementation of call/cc. It works by running
the Scheme code through a preprocessor, which generates Common Lisp code.
Scheme84 is in the public domain, and available by mail from Indiana
University. It runs on the VAX in Franz Lisp under either VMS or BSD Unix.
To receive a copy, send a tape and return postage to: Scheme84
Distribution, Nancy Garrett, c/o Dan Friedman, Department of Computer
Science, Indiana University, Bloomington, Indiana. Call 1-812-335-9770
or send mail to ···@indiana.edu for more information.
Scheme88 is available by anonymous ftp from rice.edu:public/scheme88.sh
and also from the Scheme Repository.
----------------------------------------------------------------
Subject: [4-4] Free Implementations of Other Lisp Dialects
PC LISP is a Lisp interpreter for IBM PCs (MSDOS) available from any
site that archives the group comp.binaries.ibm.pc, such as
wuarchive.wustl.edu:/mirrors/msdos/lisp/pclisp30.zip
PC-LISP is a Franz LISP dialect and is by no means Common LISP
compatible. It is also available directly from the author by sending
2 blank UNFORMATTED 360K 48TPI IBM PC diskettes, a mailer and
postage to: Peter Ashwood-Smith, 8 Du Muguet, Hull, Quebec, CANADA,
J9A-2L8; phone 819-595-9032 (home). Source code is available from the
author for $15.
Feel (Free and Eventually Eulisp) is an initial implementation of the
EuLisp language. It can be retrieved by anonymous FTP from
ftp.bath.ac.uk in the directory /pub/eulisp/ as the file
feel-0.75.tar.Z. feel-0.75.sun4.Z is the Sparc executable. The
EuLisp language definition is in the same directory. Feel is also available
from gmdzi.gmd.de [129.26.8.90] in the /languages/lisp/eulisp directory.
It includes an integrated object system, a module system, and support
for parallelism. EuLisp is sort of like an extended Scheme. The
program is a C-based interpreter, and a bytecode interpreter/compiler
will be available sometime soon. The distribution includes an
interface to the PVM library, support for TCP/IP sockets, and
libraries for futures, Linda, and CSP. Feel is known to run on Sun3,
Sun4, Stardent Titan, Alliant Concentrix 2800, Orion clippers, DEC
VAX, DECstation 3000, Gould UTX/32, and Inmos T800 transputer (using
CS-Tools). (All bar the last four have a threads mechanism.) It can
run in multi-process mode on the first three machines, and hopefully
any other SysV-like machine with shared memory primitives. Porting
Feel to new machines is reasonably straightforward. It now also runs
on MS-DOS machines. Written by Pete Broadbery <···@maths.bath.ac.uk>.
Apply/Eu2C is an EuLisp->C compiler available from ISST. Eu2C runs on
top of Franz Allegro CL 4.1 and compiles EuLisp-Modules into C source
code which then must be compiled by an ANSI C-compiler (currently only
GCC is supported). The Eu2C implementation provides EuLisp 0.99
level-0, with the exception of concurrency. Future versions of Eu2C
will include a C interface and straight module compilation. The
development of Apply/Eu2C was supported by the German Federal Ministry
for Research and Technology (BMFT) within the joint project APPLY. The
partners of this project are the Christian Albrechts University Kiel,
the Fraunhofer Institute for Software Engineering and Systems
Engineering (ISST), the German National Research Center for Computer
Science(GMD), and VW-Gedas. The main goal of APPLY project is to
develop a Lisp system which consistently supports the efficient
execution of applications and simplifies their integration into
current software environments. Towards that end, ISST is
investigating strategies for the compilation of EuLisp-Modules into
efficient stand-alone C-Programs. The Eu2C compiler is the first step
along this path. Eu2C is available by anonymous ftp from
ftp.isst.fhg.de:APPLY/Distribution/. Please send bug reports and
comments to ··············@isst.fhg.de or ·········@isst.fhg.de. If
you're using Eu2C, please send them a message with "Apply/Eu2C" in the
subject line to be added to the mailing list of users.
----------------------------------------------------------------
Subject: [4-5] Commercial Implementations of Other Lisp Dialects
Franz Lisp 2.0 runs on the Apple Macintosh, requiring 1mb RAM for the
interpreter ($99) and 2.5mb RAM for the compiler ($199). Student prices
are $60 for the interpreter and $110 for the interpreter and compiler.
Includes editor and language reference manual. Complete sources are
available for $649. The ALJABR symbolic mathematics system costs $249.
Write to: Fort Pond Research, 15 Fort Pond Road, Acton, MA 01720,
call 1-508-263-9692, or send mail to ·····@fpr.com.
Le-Lisp includes a compiler, color and graphic output, a debugger, a
pretty printer, performance analysis tools, tracing, and incremental
execution. Le-Lisp currently runs on Unix, VMS, and Windows 3.1. Note
that Le-Lisp is neither Common Lisp nor Scheme. Le-Lisp was
originally developed in 1980 at Inria, the French national computer
science laboratory, by a team led by Jerome Chailloux for work on VLSI
design. It was based on several earlier Lisps in the MacLisp family,
but was not directly derived from MacLisp. Le-Lisp enjoyed a large
success in the French academic world because it was small, fast, and
portable, being based on a abstract machine language called LLM3. In
1983, for example, Le-Lisp ran on Z-80 machines running CP/M. In 1987,
Ilog was formed as an offshoot of Inria to commercialize and improve
Le-Lisp and several products which had been developed with it,
including a portable graphic interface system and an expert system
shell. Since then, Ilog has continued to grow and expand the use of
Le-Lisp into industrial markets around the world. Ilog is the largest
European Lisp vendor, and continues to develop new products and
markets for Lisp. In 1992, Ilog released the next major version of
Le-Lisp, Le-Lisp version 16. This version modernizes Le-Lisp for use
in the industrial world, adding lexical closures and
special-form-based semantics for static analysis, a new object system
based on the EuLisp object system (TELOS), an enhanced module system
for application production, a conservative GC for integration with C
and C++, and compilation to C for portability and efficiency on a wide
range of processors. For pricing and other information, write to
ILOG, 2 Avenue Gallieni, BP 85, 94253 Gentilly Cedex, France, call
33-1-46-63-66-66, fax 33-1-46-63-15-82, or send email to Jerome
Chailloux (········@ilog.fr).
Clisp is a library of functions which extends the C programming
language to include some of the functionality of Lisp. Costs $349.
Write to Drasch Computer Software, 187 Slade Road, Ashford, CT 06278,
or call or fax 203-429-3817.
Two references in Dr. Dobb's journal on Lisp-style libraries for C
are: Douglas Chubb, "An Improved Lisp-Style Library for C", Dr. Dobb's
Jounral #192, September 1992, and Daniel Ozick, "A Lisp-Style Library
for C", Dr. Dobb's Journal #179:36-48, August 1991. Source is available by
ftp from various archives, including wuarchive.wustl.edu (MSDOSDDJMAG),
or ftp.mv.com:/pub/ddj, or the DDJ Forum on Compuserve.
Lily (LIsp LibrarY) is a C++ class library that lets C++ programmers
write LISP-style code. Includes some example programs from Winston's
Lisp book recoded in Lily. Most or all of chapters 17 (Symbolic
Pattern Matching), 18 (Expert Problem Solving), and 23 (Lisp in Lisp)
are implemented in the examples. Lily works with GNU G++ (2.4.5) and
Turbo C++ for Windows. Lily is available by anonymous ftp from
sunsite.unc.edu:pub/packages/development/libraries/ [152.2.22.81]
as lily-0.1.tar.gz. This site is fairly slow; a copy is available from
the Lisp Utilities collection. For more information, contact
Roger Sheldon <·······@kong.gsfc.nasa.gov>.
Other Lisps for PCs include:
o UO-LISP from Calcode Systems, ····················@rand.org
It comes complete with compiler and interpreter, and is optimised for
large programs. It is Standard LISP, not Common LISP. They are based
in Amoroso Place in Venice, CA.
o LISP/88 v1.0. Gotten from Norell Data Systems, 3400 Wilshire Blvd,
Los Angeles, CA 90010, in 1983. They may or may not still exist.
o IQLisp. Not a Common Lisp but still very good for PCs - you can
actually get a lot done in 640K. The lisp itself runs in less than
128K and every cons cell takes only 6 bytes. Unfortunately that
makes the 640K (maybe a little more, but certainly no more than 1M)
limit really hard. It has a byte code compiler which costs extra.
This has support for all sorts of PC specific things.
It costs $175 w/o compiler, $275 with.
Write to: Integral Quality, Box 31970, Seattle, WA 98103,
call Bob Rorschach, (206) 527-2918 or email ···@franz.com.
----------------------------------------------------------------
Subject: [4-6] What is Dylan?
Dylan is a new Object-Oriented Dynamic Language (OODL), based on
Scheme, CLOS, and Smalltalk. The purpose of the language is to retain
the benefits of OODLs and also allow efficient application delivery.
The design stressed keeping Dylan small and consistent, while allowing
a high degree of expressiveness. Dylan is consistently object-oriented;
it is not a procedural language with an object-oriented extension. A
manual/specification for the language is available from Apple Computer.
Send email to ····················@cambridge.apple.com or write to
Apple Computer, 1 Main Street, Cambridge, MA 02142. Include your
complete address and also a phone number (the phone number is
especially important for anyone outside the US). Comments on Dylan can
be sent to the internet mail address ··············@cambridge.apple.com.
The mailing list ··········@cambridge.apple.com is for any and all
discussions of Dylan, including language design issues, implementation
issues, marketing issues, syntax issues, etc. The mailing list
··············@cambridge.apple.com is for major announcements about
Dylan, such as the availability of new implementations, new versions
of the manual, etc. This mailing list should be *much* lower volume
than info-dylan. Everything sent to this list is also sent to
info-dylan. The newsgroup comp.lang.dylan is gatewayed to the
info-dylan mailing list.
Send mail to the -request version of the list to be added to it.
You can also send an email message to ·········@cambridge.apple.com
with "subscribe info-dylan" or "unsubscribe info-dylan" in the body,
and likewise for the other lists, mutatis mutandis.
Apple hasn't announced plans to release Dylan as a product.
The directory cambridge.apple.com:pub/dylan contains some documents
pertaining to Dylan, including a FAQ list.
======== THOMAS ========
Thomas is a compiler for a language that is compatible with the
language described in the book "Dylan(TM) an object-oriented dynamic
language" by Apple Computer Eastern Research and Technology, April
1992. Thomas was written at Digital Equipment Corporation's Cambridge
Research Laboratory. Thomas is NOT Dylan(TM) and was built with no
direct input, aid, assistance or discussion with Apple.
Thomas is available to the public by anonymous ftp at
crl.dec.com:pub/DEC/Thomas
gatekeeper.pa.dec.com:pub/DEC/Thomas
altdorf.ai.mit.edu:archive/Thomas
The Thomas system is written in Scheme and runs under MIT's CScheme,
DEC's Scheme->C, and Marc Feeley's Gambit. It can run on a wide range
of machines including the Macintosh, PC compatibles, Vax, MIPS, Alpha,
and 680x0. Thomas generates IEEE compatible Scheme code.
A ready-made version of Thomas 1.1 interpreter built upon MacGambit
2.0 as a double-clickable Macintosh application is available by
anonymous ftp from cambridge.apple.com:/pub/dylan/gambit/ as
the file thomas-1.1-interp.hqx.
For discussion of Thomas, send a note to
···················@crl.dec.com
to be added to the mailing list.
DEC CRL's goals in building Thomas were to learn about Dylan by
building an implementation, and to build a system they could use to
write small Dylan programs. As such, Thomas has no optimizations of
any kind and does not perform well.
The original development team consisted of:
Matt Birkholz (········@crl.dec.com)
Jim Miller (·······@crl.dec.com)
Ron Weiss (······@crl.dec.com)
In addition, Joel Bartlett (········@wrl.dec.com), Marc Feeley
(······@iro.umontreal.ca), Guillermo Rozas (····@zurich.ai.mit.edu)
and Ralph Swick (·····@crl.dec.com) contributed time and energy to the
initial release.
======== Marlais ========
Marlais is a simple interpreter for a language strongly resembling
Dylan. It is available by anonymous ftp from
travis.csd.harris.com:/pub/
Currently runs on i386 and i486 (OS/2 or Linux), IBM PC/RT, IBM
RS/6000, HP9000/300, HP9000/700, DECstations (Ultrix), SGI (IRIX),
Sony News, Apple Macintosh (A/UX), Sun3, Sun4, Vax (4.3bsd and
ultrix), m88k (Harris Nighthawk running CX/UX), MIPS M/120, Sequent
Symmetry, Encore Multimax. Contact Brent Benson
<·····@ssd.csd.harris.com> for more information.
================
The Gwydion Project at CMU is developing an innovative new software
development environment based on the Dylan language (and, in the
process, will make available a very high-quality implementation of
Dylan). This project includes many of the same people responsible for
CMU Common Lisp. (In Welsh mythology, Gwydion is the uncle of Dylan
and nephew of Math.)
----------------------------------------------------------------
Subject: [4-7] What is Pearl Common Lisp?
When Apple Computer acquired Coral Software in January 1989, they
re-released Coral's Allegro Common Lisp and its optional modules as
Macintosh Allegro Common Lisp (now just Macintosh Common Lisp).
Coral's other product, Pearl Lisp, was discontinued at that time.
Pearl Lisp provides a subset of the functionality of MACL 1.3 and is
not even fully CLtL1-compatible (e.g., the implementation of defstruct is
different).
Despite rumors to the contrary, Pearl Lisp is not and never was public
domain. Nevertheless, Pearl Lisp and its documentation were placed in
the "Moof:Goodies:Pearl Lisp" folder on the first pressing of "Phil
and Dave's Excellent CD", the precursor to the current Apple
Developer's CD-ROM series. Apple removed Pearl from later versions of
the developer CD-ROM distribution because of complaints from other
Lisp vendors. If you own a copy of Pearl Lisp or a copy of this
CD-ROM, you can make it runnable under System 7 with some slight
modifications using ResEdit. To repeat, Pearl Lisp is NOT public
domain, so you must own a copy to use it.
To make it runnable, one needs to use ResEdit to make changes to the
BNDL and FREF resources so that it will connect to its icons properly.
This will make it respond to double-clicks in the normal manner and
make it be properly linked to its files. Detailed instructions for
modifying Pearl Lisp using ResEdit may be obtained from the Lisp
Utilities Repository by anonymous ftp from ftp.cs.cmu.edu in the
directory
/afs/cs.cmu.edu/project/ai-repository/ai/lang/lisp/impl/pearl/
as the file pearl-instructions.text.
After you've made the changes, it will run under System 7 on 68000s
and 68030s if you turn off 32-bit addressing. It seems to bomb on a
Quadra.
If you need a more powerful Lisp or one that is compatible with the
standard for Common Lisp, consider purchasing Macintosh Common Lisp.
----------------------------------------------------------------
Subject: [4-9] What Lisp-related discussion groups and mailing lists exist?
Before posting to any discussion group, please read the rest
of this FAQ, to make sure your question isn't already answered.
Scheme-related mailing lists and newsgroups are listed in the Scheme
FAQ, and AI-related mailing lists and newsgroups are listed in the AI FAQ.
First of all, there are several Lisp-related newsgroups:
comp.lang.lisp General Lisp-related discussions.
See below for archive information.
comp.lang.clos Discussion related to CLOS, PCL, and
object-oriented programming in Lisp.
Gatewayed to ···········@cis.ohio-state.edu.
(or equivalently, ··············@cis.ohio-state.edu)
See below for info on the newsgroup's archives.
comp.org.lisp-users Discussions related to Association of Lisp Users.
Gatewayed to the ALU mailing list. This is an
organizational mailing list/newsgroup, not a
technical forum.
comp.std.lisp User group (ALU) supported standards. Moderated
by Brad Miller <······@cs.rochester.edu>.
Submissions should be sent to
··············@cs.rochester.edu
comp.lang.lisp.mcl Discussions related to Macintosh
Common Lisp. This newsgroup is gatewayed
to the ········@cambridge.apple.com
mailing list and archived on cambridge.apple.com.
comp.lang.lisp.franz Discussion of Franz Lisp, a dialect of Lisp.
(Note: *not* Franz Inc's Allegro.)
comp.lang.lisp.x Discussion of XLISP, a dialect of Lisp, and XScheme.
comp.sys.xerox Discussions related to using Medley (name exists
for historical reasons, and is likely to change
soon). Gatewayed to the info-1100 mailing list.
comp.sys.ti.explorer TI Explorers Lisp machines.
comp.windows.garnet Garnet, a Lisp-based GUI.
comp.ai and subgroups General AI-related dicusssion.
The newsgroup comp.lang.lisp is archived on ftp.gmd.de by month, from
1989 onward in /usenet/comp.lang.lisp. Individual files are in rnews
format. (They contain articles prefixed by a header line "#! rnews
<nchars> archive" where <nchars> is the number of characters in the
article following the header. That format is convenient for various
news processing programs (e.g. relaynews) and is rather easy to
process from a lisp program too.) A copy of the GMD archives for
comp.lang.lisp is available on cambridge.apple.com:pub/comp.lang.lisp.
We list several mailing lists below. In general, to be added to
a mailing list, send mail to the "-request" version of the address.
This avoids flooding the mailing list with annoying and trivial
administrative requests. [To subscribe to info-mcl, info-dylan, or
other mailing lists based at cambridge.apple.com, send a message to
·········@cambridge.apple.com with "subscribe <list_name>" in the
message body. Likewise use "unsubscribe <list_name>" to cancel your
subscription and "help" to get help.]
General Lisp Mailing Lists:
···········@ai.sri.com Technical discussion of Common Lisp.
··············@cs.cmu.edu Low volume moderated mailing list
associated with the Lisp Utilities
Repository at CMU. (Also known as
············@cs.cmu.edu)
········@think.com A mailing list concerning the contents
of this FAQ posting only.
···@freud.arc.nasa.gov Forum for use by members (current
and prospective) of the Association
of Lisp Users. It is bidirectionally
gatewayed into the newsgroup
comp.org.lisp-users. This is an
organizational mailing list,
not a technical forum.
Particular Flavors of Lisp:
········@cambridge.apple.com Macintosh Common Lisp. Gatewayed
to the comp.lang.lisp.mcl newsgroup.
···············@cambridge.apple.com Automatically generated digest format
version of the info-mcl mailing list.
··········@cs.cmu.edu CMU Common Lisp bug reports
····@ai.sri.com Symbolics Lisp Users Group
Archived on warbucks.ai.sri.com and
ftp.ai.sri.com:/pub/slug.
··········@ucbvax.berkeley.edu Franz Allegro Common Lisp
···@cli.com Kyoto Common Lisp
Archived in ftp.cli.com:pub/kcl/kcl-mail-archive
···@rascal.ics.utexas.edu Forwards to ···@cli.com.
·········@harlqn.co.uk LispWorks
··········@ma2s2.mathematik.uni-karlsruhe.de CLISP
To subscribe, send mail to ········@ma2s2.mathematik.uni-karlsruhe.de
with "subscribe clisp-list <your full name>" in the message body.
Use "help" to get a help message back and "unsubscribe clisp-list"
to remove yourself from the list.
················@sumex-aim.stanford.edu TI Explorer Lisp Machine
···············@sumex-aim.stanford.edu TI Explorer Lisp Machine
·········@cis.ohio-state.edu Xerox/Envos Lisp machine environment,
InterLisp-D, and Medley. Gatewayed to
the newsgroup comp.sys.xerox. Will be
moving to ·········@anzus.com.
·············@berkeley.edu The Franz Lisp Language.
···············@berkeley.edu Maintainers of Franz Lisp.
Lisp Windowing Systems:
··········@ai.sri.com Common Lisp Window System Discussions.
·······@expo.lcs.mit.edu CLX (Common Lisp X Windows)
····@bbn.com Common Lisp Interface Manager
···········@dsg.csc.ti.com Common Lisp User-Interface Environment
···············@cs.cmu.edu Express Windows
············@cs.cmu.edu Garnet (send mail to ······@cs.cmu.edu
or ··············@cs.cmu.edu to be added)
··········@gmdzi.gmd.de GINA and CLM
·········@harlequin.co.uk LispWorks
·······@netcom.com WINTERP (OSF/Motif Widget INTERPreter)
·····@csrl.aoyama.ac.jp YYonX
Lisp Object-Oriented Programming:
···········@cis.ohio-state.edu (same as ··············@cis.ohio-state.edu)
Discussion related to CLOS, PCL, and object-oriented programming
in Lisp. The name is in honor of the first freely-available
implementation of CLOS, Xerox PARC's Portable Common Loops, and
was originally the mailing list for discussing that
implementation. Now gatewayed to the comp.lang.clos newsgroup.
The mailing list is archived on nervous.cis.ohio-state.edu in
the directory pub/lispusers/commonloops.
The CLOS code repository is in pub/lispusers/clos.
Miscellaneous:
······················@umnstat.stat.umn.edu
Use of Lisp and Lisp-based systems in statistics.
························@ucbarpa.berkeley.edu
Franz Inc's GNU-Emacs/Lisp interface.
·········@cis.ohio-state.edu
Job offers requiring a knowledge of Lisp. See [1-6].
Electronic Journals:
Electronic Journal of Functional and Logic Programming (EJFLP)
EJFLP is a refereed journal that will be distributed for free via e-mail.
The aim of EJFLP is to create a new medium for research investigating the
integration of the functional, logic and constraint programming paradigms.
For instructions on submitting a paper, send an empty mail message with
Subject: Help
to
···········@ls5.informatik.uni-dortmund.de.
You will receive an acknowledgment of your submission within a few hours.
To subscribe to the journal, send an empty mail message to
·············@ls5.informatik.uni-dortmund.de
You will receive an acknowledgment of your subscription within
a few days.
If there are any problems with the mail-server, send mail to
········@ls5.informatik.uni-dortmund.de.
The editorial board is: Rita Loogen (RWTH Aachen), Herbert Kuchen (RWTH
Aachen), Michael Hanus (MPI-Saarbruecken), Manuel MT Chakravarty (TU
Berlin), Martin Koehler (Imperial College London), Yike Guo (Imperial
College London), Mario Rodriguez-Artalejo (Univ. Madrid), Andy Krall
(TU Wien), Andy Mueck (LMU Muenchen), Tetsuo Ida (Univ. Tsukuba,
Japan), Hendrik C.R. Lock (IBM Heidelberg), Andreas Hallmann (Univ.
Dortmund), Peter Padawitz (Univ. Dortmund), Christoph Brzoska (Univ.
Karlsruhe).
----------------------------------------------------------------
Subject: [4-10] ANSI Common Lisp --
Where can I get a copy of the draft standard?
The first public review of the draft proposed American National
Standard for Common Lisp ended November 23, 1992. The second public
review of the draft will be held from February 4 through April 5, 1994.
Hard copies of the draft may be purchased from Global Engineering
Documents, Inc., 2805 McGaw Avenue, Irvine, CA 92714, 1-800-854-7179,
714-261-1455 for a single copy price of $80 ($104 international).
Copies of the TeX sources and Unix-compressed DVI files may be
obtained by anonymous FTP from parcftp.xerox.com in the directory
/pub/cl/document/*. The file Reviewer-Notes.text should be read before
ftp'ing the other files.
There is no mechanism for submitting Public Review comments by e-mail.
Comments on the draft must be submitted in hard copy format BOTH to X3
Secretariat, Attn: Lynn Barra, 1250 Eye Street NW, Suite 200,
Washington, DC 20005-3922 AND to American National Standards Institute,
Attn: BSR Center, 11 West 42nd St. 13th Floor, New York, NY 10036.
The current ISO Lisp draft standard is available by anonymous FTP from
ma2s2.mathematik.uni-karlsruhe.de:/pub/lisp/islisp/islisp-84.dvi
[129.13.115.2].
----------------------------------------------------------------
;;; *EOF*